Home > LAWN & GARDEN > LAWN CARE > WATERING > DRIP IRRIGATION-NAT'L DIVERSIF
Sort By:
1 2
Stretch 'N Lock S5600UB Tubing Coupling Raindrip R302CT Tube End Clamp Raindrip R645CT Double Duty Double End Hole Plug
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 PSI.  For use with 1/2" - .710" (.520" - .620" I.D) hose. Used to shut off the end of 1/4" tubing. Removes easily. Double-ended, double-duty plugs seal either large or small holes in 1/2", 5/8" or .710" hose.
Raindrip R314CT Tubing Elbow Raindrip R325CT Hose Swivel Adapter With Filter Washer Raindrip R338CT Tap Off
Double barbed design allows water pressure up to 50 PSI. For use with 1/4" (.160" I.D.) tube only. Connects 1/4" tubing to faucet or other 3/4" male hose thread. Includes filter washer. Connects 1/4" tubing to existing 1/2" MPT underground sprinkler riser. Inlet: 1/2" FPT. Outlet: 1/4" compression and 1/2" MPT. Includes filter washer.
Raindrip R307CT Tube to Hose Tee Raindrip R336CT Riser Adapter Raindrip R312CT Hose Connector
Double barbed design allows use with higher water pressures. For use with 1/4" (.160 - .197" I.D.) tube only. Creates a 1/4" branch from a 1/4" tube, or two 1/4" branches from a 1/2" hose. For water pressures up to 50 PSI. Connects Raindrip low-flow sprinklers to 1/2" MPT sprinkler risers. Inlet: 1/2" FPT. Outlet: 10-32 FNFT. Includes filter washer. Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4" connector used with 1/4" (.160 - .197" I.D.) tube only. Double barb design allows water pressures up to 50 PSI.
Raindrip R380CT Support Stake Raindrip R320CT Hose Swivel Adapter With Filter Washer Raindrip R390CT Tube Support Clamp
4" plastic stakes hold 1/4" tubing in place next to plants. 3/4" hose thread swivel x 1/2" compression adaptor connects 1/2" poly hose to faucet or other 3/4" male hose thread. Includes filter washer. For use with 1/2" (.620" - .630" O.D.) hose only. Green compression ring. Black poly clamps molded to fit 1/4" tubing. Includes pre-inserted nail.
Raindrip R303CT Hose End Plug With Cap Raindrip R326CT Swivel Tubing Adapter With Washer Raindrip R301CT Hose End Clamp
Closes ends of 1/2" (.620"-. 630" O.D.)  poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 PSI. Swivel adaptors join tubing to threaded adaptor. For use with 1/4'' (.245" O.D.) tube only. Connects 1/4'' vinyl tubing to 3/4'' male pipe thread. R326CT/R326CB includes washer. 3/4" pipe threaded swivel x 1/4'' compression adaptor. Used to shut off the end of 1/2" Rain Drip poly hose. Removes easily.
Raindrip R381CT Support Stake Raindrip R310CT Tubing Coupling Raindrip R384CT Drip Watering Stake With Riser
Heavy-duty plastic stakes hold 1/4" lines in place. Join or connect two lengths hose. Made from ABS. For water pressure up to 60 PSI. 13" stake with adjustable 8" rigid riser for use with low-flow sprinklers and sprayheads with 10-32 NFT inlets. Screw sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.
Raindrip R630CT Hole Punch With Hole Plug Raindrip R315CT Tubing Elbow With Green Compression Ring Raindrip R612CT Double Barbed Value
Designed for comfortable use, punches holes in 1/2", 5/8" or .710" hose to insert PC drippers or 1/4" fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs. For water pressure up to 60 PSI. Ends are color coded for easy size identification. Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4" (.160" I.D.) vinyl tubing only. Double barbed design allows water pressure up to 50 PSI.
Raindrip R156CT Adjustable Stream Spray Bubbler Raindrip R153CT Fan Spray Bubbler Raindrip R305CT Tubing Tee
Convert existing 1/2" underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3' at 30 PSI or for finer water droplets, a fan spray, with spray diameter up to 13' at 30 PSI.  Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position. Convert existing 1/2" underground sprinkler systems to low flow watering where a drip circuit can't be set up.  Available in stream spray with a maximum spray diameter of 3' at 30 PSI or for finer water droplets, a fan spray with spray diameter up to 13' at 30 PSI. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position. Compression tees made from ABS. For water pressure up to 60 PSI.
Raindrip R398CT Cleated Tubing Stake Raindrip R334CT Swivel Tee Assembly Raindrip R180CT Adjustable Low Flow Steam Sprayer
Designed to keep low-flow watering lines where you want them. Holds 1/2", 5/8" or .710" lines in place. Plastic stakes have an exclusive cleated design to hold lines securely in place. Swivel tee assembly for 1/2'' double drip manifold. Connects two 1/2'' poly hose to a 1/2'' sprinkler riser. Includes: tee, filter, 3-way connector and 2 flow controls. Sprays 12 individual streams over a circular area with an adjustable diameter of up to 18 feet. (for windy conditions) Sprayer Inlet: 10-32 NFT.  Featuring a knob to adjust the flow (4-20 GPH at 25 PSI) and diameter of spray.
Rain Drip 016005P Raindrip Drip Watering Tubing Raindrip R187CT Low Flow Drip Irrigation Sprayer Raindrip R191CT Low Flow Drip Irrigation Sprayer
Remains strong in the hot sun, flexible in cool temperatures. Color-Black. Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 feet. Sprayer Inlet: 10-32 NFT. Featuring a knob to adjust the flow (4-20 GPH at 25 PSI) and diameter of spray. Uniformly sprays water over a semicircular area with an adjustable radius of up to 8 feet. Sprayer Inlet: 10-32 NFT. Featuring a knob to adjust the flow (4-20 GPH at 25 PSI) and diameter of spray.
   
 
1 2